- THE BELOW INSTALL GUIDE & VIDEO WAS DONE ON A MK2 FORD RANGER HOUSING. THIS GUIDE CAN BE ADAPTED TO SUIT OTHER VEHICLES WITH DUST CAP INSTALLS -
The above video is how the HB3 (9005) high beam globe is installed in the driver side MK2 Ranger headlight housing.
We have done a install video for the passenger side headlight with the headlight in the vehicle.
LOW BEAM - XLT | WILDTRACK - The Install is straight forward for XLT WILDTRACK models as the hole for the low beam globe is almost center in the housing.
LOW BEAM - XL | XLS - The Install for the low beam we have done a video and info-graphic step by step guide which can be found towards the bottom of this page.
HIGH BEAM - XL | XLS | XLT | WILDTRACK - The High Beam install you will need to follow theinfo-graphic or video as the high beam hole is off center so will require to be installed as the guide below.
The passenger side headlight is slightly different and we have done a video for this install as well with the headlight in the vehicle.
*To remove the passenger side LED lamp unseat the lamp so tabs are on top of the white locking plate and not inside the tab holes in the housing and turn anti-clockwise*
Once the Vanquish Conversion is installed your dust caps will be reinstalled to maintain IP waterproof rating.
The above video is how the H7 low beam globe is installed in the XL | XLS MK2 Ranger headlight housing.
The info-graphic below has more detailed photos of the how Vanquish conversion was installed in the video.