VANQUISH E-MARK | ECE APPROVAL EXPLAINED

ECE EMARK APPROVAL STAMP

What does E-MARK / ECE approved mean ?

E-MARK is an approval marking that indicated the product meets the requirements of ECE regulations.
ECE regulations comes from the united nations Economic Commission for Europe.
ECE compliant guarantees your lights are compliant in the European Union and in non-European countries that have adopted the ECE regulations.

ADR HARMONISATION

The function of this Australian Design Rule is to facilitate the automatic acceptance of the latest version of United Nations Economic Commission for Europe (UNECE) regulations that have been adopted as alternative standards within the ADRs and have been ‘applied' by Australia under the UNECE 1958 Agreement.
Snippet Taken From - Vehicle Standard (Australian Design Rule - Harmonisation) 2012F2012L00336

Below is a map of ECE countries.

 ------------------------------

VANQUISH LED HEADLIGHT CONVERSION APPROVAL

 

VANQUISH LED Headlight Conversion Approval - E-MARK - E24 | ECE R112

ECE R112 Approval Meaning - 

"Uniform Provisions Concerning The Approval Of Motor Vehicle Headlamps Emitting An Asymmetrical Passing Beam Or A Driving Beam Or Both And Equipped With Filament Lamps And/Or Light-emiting Diode (LED) Modules"

ECE BEAM PATTERN COMPLIANT

Similar or better beam pattern than standard halogen lamp, to see and be seen better.

There is currently no ECE regulation existing for LED bulbs. ECE beam pattern compliance is tested on several commonly used luminaires where the LED bulb beam pattern matches the ECE approved halogen beam pattern.


GET THE VIP TREATMENT

vaScript Snippet (v1.0.1) -->