UNSURPASSED LIGHT OUTPUT
MORE LEDS PER LAMP
Vanquish boasts 16pcs of A Grade Philips Lumled Zes LEDs per lamp for the dual high and low beam H4 model (as opposed to 12 pcs for others on the market). But what makes our H4 model even more special is that all 16 LEDs illuminate when on high beam - as opposed to others which only use 6.
This extra LED feature is not only confined to our H4 model. The Vanquish single beam models boast 8pcs of A Grade Philips Lumled Zes LEDs while others have only 6pcs.
100% COPPER LAMP
Vanquish LED headlight conversions are 100% copper - no aluminium plastic, rubber or glue. This is unique only to LLA’s Vanquish.
Copper is a more superior conductor of heat than these other materials. This results in more energy being maintained in the lamp enabling a brighter light output.
ONE PIECE DESIGN
The design for most LED light conversion lamps is in two or more pieces. These lose energy as it transfers between the separate components. The Vanquish one-piece design combats this problem and because less energy is lost from the Vanquish bulb there is more available to be used to achieve a brighter light.
The Vanquish LED headlight 100% copper material and one-piece design combine to make our Vanquish range excellent conductors of heat. This keeps the temperature of the lamp down, substantially decreasing the chance of a lamp being burned. This also aids in the stability of the LED headlight conversion, increasing its longevity.
Vanquish uses copper heat sinks (or belts) instead of fans for cooling. This substantially increases the reliability of the LED conversion as fans are easily damaged.
IP68 – the highest possible rating. The one-piece design with no fan means there are no outlets for water, dust, dirt or sand to enter.
12V – 24V - suitable for both cars and trucks
Plug and play - easy installation into any vehicle
Dust caps can still be used after installation
Built in CAN bus
No UV emitted so won’t discolour vehicle headlight housings
350m + light projection
Anti-glare beam design
Beam pattern is almost identical to that of the original halogen lamp with a clear cut-off line.
6000K colour temperature – white light almost the same as daylight
RFI certified – no interference with electrical devices e.g. car radio.